UK Design & Manufacturing

The junction box that fits over a conduit box.

Tamper detection for Grade 3 and high-security systems. Nothing to coordinate with the containment installer. Nothing to rework.

The HSJB is a high security junction box with front and rear tamper detection. It fits over a standard 20 mm or 25 mm conduit box, steel or PVC. Your containment installer fits ordinary conduit boxes, as they always do. You fit an HSJB over the ones that need it. Independently tested by BRE Global and made in the UK.

BRE Global tested BS EN 50131-3 · Grade 3 tamper Tested in line with IK08 IP40

£38.99 ex VAT (£46.79 inc) · trade & volume pricing on request

Tier8 HSJB High Security Junction Box fitted over a conduit box on galvanised conduit

Got one of our sample packs? The unit in your hand is exactly what ships — same ASA polymer, same fixed print profile, same batch traceability. Below: the proof, the install method and how to order.

Plan the containment as normal. Add the tamper protection afterwards.

Nothing to coordinate

The containment goes in on standard conduit boxes throughout. There are no junction box positions to mark on drawings, no special boxes to issue to another trade, and no site walk to mark them up.

Nothing to rework

A conventional junction box has a different footprint from a conduit box. Swapping one in means trimming the conduit back, and on a mid-run box, taking both conduits off. In our experience that is about an hour a location. The HSJB fits over the box that’s there, using two extra screws and the drill guide provided.

Independently tested by BRE Global

Tamper detection on both opening and removal, impact testing in line with IK08 and IP40 ingress — every test passed, in writing, in a report you can hand to the system designer.

Two ways to do the same job

The usual way

  1. Mark junction box positions on the containment drawings.
  2. Produce general arrangement drawings showing where each box goes.
  3. Walk the site so the positions can be marked up.
  4. The containment is often fitted with ordinary conduit boxes anyway.
  5. Someone goes back to each location, cuts the conduit back and swaps the box. In our experience, about an hour each.

With the HSJB

  1. The containment installer fits standard conduit boxes, as normal.
  2. The security installer fits an HSJB over each one that needs tamper protection: two screws, terminate, close.

Tested, not claimed

The HSJB has been independently tested by BRE Global against selected clauses of BS EN 50131-3, commensurate with Grade 3, Type B ancillary equipment — report P130175. The BRE results demonstrate that production-grade additive manufacturing is a legitimate process for security applications.

Independent testing is not certification: overall system conformity remains the responsibility of the system designer or installer. Suitable for use in systems designed to comply with PD 6662:2017.

Download the BRE report (PDF) →
  • Tamper protection BS EN 50131-3 cl. 8.7.1 Passed
  • Tamper detection — opening the housing cl. 8.7.2.1 Passed
  • Tamper detection — removal from mounting cl. 8.7.2.2 Passed
  • Impact tested in line with IK08 Passed
  • Ingress protection IP40 BS EN 60529 Passed

Tamper alarm generated before access to internal elements was possible — combined front and rear detection, NC contacts.

Printed to a locked profile.
Tested by BRE.

The HSJB is 3D printed. We say that plainly, because the buyers we work with check, and because the way we do it is a strength, not a caveat.

Want the longer version? Read “3D printed” doesn’t mean what it used to.

Fitted in three steps

  1. Fix two screws adjacent to the existing conduit box — drill guide used for positioning.
  2. Terminate cables and tamper loop into the supplied 12-point terminal block, secured to the conduit box.
  3. Fit the HSJB over the conduit box and secure with the two security screws provided.

Full step-by-step guide, printable drill template and commissioning checks:

Installation guide →
HSJB fitted to a standard conduit box

Technical data

ModelT8-HSJB-STD · adjustable-fixing variant T8-HSJB-ADJ on request
Independent testingBRE Global, selected clauses of BS EN 50131-3, commensurate with Grade 3, Type B ancillary equipment — report P130175
Tamper detectionCombined front and rear, NC contacts, wired in series
Impact / ingressTested in line with IK08 · IP40 (BS EN 60529)
Terminal block12-point removable (4 × 3-way), 12–26 AWG. Keeps cable termination fast and clean on site.
Compatible boxesStandard 20 mm and 25 mm conduit boxes, steel or PVC (leg extensions supplied for 25 mm)
Fixings2 × wall screws with drill guide · 2 × M4 security screws (supplied)
MaterialASA polymer, additively manufactured in the UK to a fixed print profile
ColoursBlack (standard), grey, green, red
EnvironmentIndoor, dry, controlled environments

Questions and answers

What is a high security junction box?

A junction box that raises a tamper alarm if someone opens it or pulls it off its mounting. The HSJB has combined front and rear tamper detection with NC contacts, wired in series.

Does the containment installer need to do anything different?

No. They fit standard 20 mm or 25 mm conduit boxes as usual. The HSJB is fitted over the box afterwards by the security installer.

Will it fit the conduit boxes already on site?

Yes, standard 20 mm and 25 mm conduit boxes in steel or PVC, with leg extensions supplied for 25 mm. It needs two extra screws next to the box, and a drill guide is provided.

Can it go on a box in the middle of a conduit run?

Yes. The HSJB fits a conduit box at the end of a run, and one with conduit coming in and going out.

What has it been tested to?

It has been independently tested by BRE Global against selected clauses of BS EN 50131-3, commensurate with Grade 3, Type B ancillary equipment (report P130175). Independent testing is not certification: overall system conformity remains the responsibility of the system designer or installer.

Can it go outside?

No. It is for indoor, dry, controlled environments (IP40).

Order the HSJB

£38.99 ex VAT per unit (£46.79 inc VAT) · black, grey, green or red · drill template free with your first order.
Installer or distributor? Ask for trade and volume pricing.
Dispatched within 5 working days, usually 2 to 3, by Royal Mail Tracked 24. Need it faster? Call 01706 489765.

Not held one yet? Request a free sample unit →